Bảo hành trực tuyến

Chính sách bảo hành
Tìm kiếm sản phẩm
Danh mục sản phẩm
Hỗ trợ trực tuyến
 

Yahoo

Kỹ thuật

Yahoo

Kinh Doanh

Nick Skype status

Kỹ thuật

Nick Skype status

Kinh Doanh

0906 613 677

0906.330.390

 
Liên kết Website
Tin tức
  • banner
  • banner
  • banner
  • banner
  • banner
Sound Device Portable Audio Tools MM-1

: Sound Device Portable Audio Tools MM-1

: Còn hàng

Xin vui lòng liên hệ để biết giá.
Bảo hành
12 Tháng
Mô tả chi tiết sản phẩm
Description

Highly versatile and portable, Sound Devices' MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.

The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control.

The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.

Front Panel

Front Panel
  • Switched gain for microphone preamp,
  • Two-position high-pass filter,
  • Switched peak limiter,
  • LED for limiter or peak indication,
  • Variable level control for monitor signal,
  • Headphone volume control,
  • Headphone output on 1/4-inch connector,
  • Power LED shows green on power and red when batteries are low,
  • Power switch selects batteries or external DC,
  • Protective metal end rails and belt clip.

Back Panel

Back Panel
  • Transformer-balanced microphone input,
  • Transformer-balanced line level output,
  • Monitor source input on TRS 1/4-inch, balanced connector,
  • 48 V or 12 V phantom,
  • Phantom, dynamic, or T power,
  • Battery compartment, two AA,
  • External 5 - 17 V DC power.

Key Features

  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable"
  • Selectable 48-volt / 12-volt phantom power or 12-volt “T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering (plug included)
  • High-strength aluminum chassis with durable belt clip

Specifications

Gain

  • (Mic - Line): 0 dB to 66 dB input to output, switch selectable

Frequency Response

  • (Mic - Line) 20 Hz –20 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz (relative to 1 kHz level with 150 ohm source)

Equivalent Input Noise

  • (Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or greater)

Dynamic Range

  • (Mic to Line) 122 dB minimum at the +18 dB gain setting

THD + Noise

  • 0.05% maximum (from 50 Hz – 22 kHz @ +4 dBu output level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain setting

Gain Accuracy

  • (Mic - Line) +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100 k load impedances)

Output Clipping Level

  • (Line) +22 dBu minimum with 100k ohm load+20 dBu minimum with 600 ohm load

Input Clipping Level

  • (Mic) +4 dBu minimum at the 0 or +18 dB gain setting

Common Mode Rejection Ratio

  • 100 dB minimum at 80 Hz60 dB minimum at 10 kHz

Weight

  • 0.7 kg (1.1 lbs)

Dimensions

  • 49 mm x 95 mm x 166 mm, 1.95" x 3.75" x 6.55" (h x w x d)

Giao hàng và bảo hành tận nơi (nội thành ). Nếu ở tỉnh thì Giao hàng tại các chành xe cho các khách hàng ở tỉnh, bưu điện. Có bảo đảm.

- Hỗ trợ tư vấn giải pháp kỹ thuật,dịch vụ khắc phục sự cố 24/24.

- Mọi chi tiết xin liên hệ: 0932.153.163 Mr Hãn (kỹ thuật), 0902.413.177 Ms Liễu (kinh doanh)

- Yahoo/Sky/Gmail: trannguyenhanvn - Yahoo: kd_hopthanhthinh


 

Bookmark and Share

 

Sản phẩm khác
Newsletter
  • Tham gia hệ thống MailList của chúng tôi, bạn sẽ nhận được các thông tin mới nhất về sản phẩm, dịch vụ, giải pháp, tin tức, khuyến mãi và tuyển dụng của công ty Hợp Thành Thịnh qua email.
Giỏ hàng

Bạn chưa đặt hàng

 

Hỗ trợ khách hàng

htktHướng dẫn đặt hàng

htktGiải đáp kỹ thuật

htktTư vấn kỹ thuật

htkt Bảng giá

htktDownload Driver

Quảng cáo

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner

banner