Description The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.
Front Panel
Headphone level control for each output (x3)
Peak indicator for each headphone output
Stereo/Mono selection switch
Power LED indicates green when powered, red when batteries are low
Power switch selects powering source
Input Panel
Balanced, stereo, line-level input on XLR
Unbalanced TRS stereo input on 1/4-inch connector
Unbalanced TRS stereo input on 1/8-inch connector
Loop output on 1/4-inch to link additional HX-3s
Output Panel
1/4-inch TRS stereo headphone outputs (x3)
1/8-inch TRS stereo headphone output
Battery tube (2 x AA)
DC input, 5 - 18 VDC
HX-3 Key Features
Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.
The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.
The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1 and USBPre-2.
HX-3 Key Features List
Three isolated headphone outputs with individual volume controls.
125 dB dynamic range with flat frequency response.
Durable 1/4-inch connectors, panel mounted for strength.
Stereo or mono monitoring.
Peak LED indicates headphone overload.
Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
Loop Output to connect additional HX-3's in series.
All-metal connectors solidly mounted to the chassis for durability and RF immunity.
Free from "Pin-1" grounding problems.
Internal battery-power for up to 18 hours from two AA alkaline batteries.
Chassis-isolated 5 to 18 VDC input for easy external DC powering.
Power LED indicates low battery power.
High strength, extruded aluminum chassis with protective metal end panels.
Specification
Frequency Response
10 Hz - 50 kHz, -±1.0 dB, any input to any output, gain controls set to 50%
Voltage Gain
34 dB from balanced line to headphone output, 35 dB from headphone input to headphone output
Output Clipping Level
+18 dBu minimum with 600 ohm load, +16 dBu minimum with 300 ohm load
Headphone Output Impedance
200 ohms
Input Clipping Level
XLR: +24 dBu minimum
1/4-inch and 1/8-inch inputs: +22 dBu minimum
Dynamic Range (balanced line inputs)
120 dB minimum
THD + Noise
0.03% maximum (from 10 Hz to 22 kHz @ +10 dBu input and output level, 300 ohm load, 10 Hz - 22 kHz filter bandwidth)
Tham gia hệ thống MailList của chúng tôi, bạn sẽ nhận được các thông tin mới nhất về sản phẩm, dịch vụ, giải pháp, tin tức, khuyến mãi và tuyển dụng của công ty Hợp Thành Thịnh qua email.
Công ty Hợp Thành Thịnh thông báo tuyển Kinh doanh Dự Án - Cộng tác viên
Thông Báo Nghĩ Lễ Quốc Khánh 2/9
Thông Báo Nghĩ Lễ Quốc Khánh 2/9
Thông Báo Nghĩ Lễ Quốc Khánh 2/9
Thông báo nghỉ lễ 30/4 và 1/5
Thông báo nghỉ lễ Giỗ tổ Hùng Vương 10/3 Âm Lịch
Thư cảm ơn đối tác
NHỮNG ĐIỀU CẦN BIẾT KHI MUA HÀNG TẠI HỢP THÀNH THỊNH
Panasonic Lumix DMC-FZ1000 - Tuyệt tác của công nghệ 21
Bản quyền một năm miễn phí Norman Security Suite v8
KHUYẾN MÃI !!!!!!!!!!!
Bộ lưu điện bảo vệ dữ liệu như thế nào?
.JPG)
